Silicone Coolant Hose Set, VQ40 Nissan Xterra, Frontier, Pathfinder, Suzuki Equator with 2" to 3" Body Lift

20180105_084836-1.jpg
20180101_145404-1.jpg
20180101_142803-1.jpg
20180101_151005-1.jpg
20180102_091932-1.jpg
20180102_095507-1.jpg
20180102_111430-1.jpg
20180105_082732(0)-1.jpg
Picture1.png
20180105_084836-1.jpg
20180101_145404-1.jpg
20180101_142803-1.jpg
20180101_151005-1.jpg
20180102_091932-1.jpg
20180102_095507-1.jpg
20180102_111430-1.jpg
20180105_082732(0)-1.jpg
Picture1.png

Silicone Coolant Hose Set, VQ40 Nissan Xterra, Frontier, Pathfinder, Suzuki Equator with 2" to 3" Body Lift

225.00

Free Shipping on Everything We Sell!!

This set fits:

The following vehicles with a body lift. If you do not have a 2"-3" body lift please order our other VQ40 set.
05-17 Frontier. 
05-15 Xterra
05-12 Pathfinder
09-13 Suzuki Equator

The above listed vehicles should have the Engine Type: VQ40 - 4.0L V6  This is the standard engine in the USA.

We also carry coolant hoses for: Nissan Titan VK56, Nissan Titan XD Cummins and Nissan 3.3L engines.

High Temp 3-ply Reinforced Silicone Complete Radiator Hose Kit

Our kit is a direct replacement for your rubber OEM hoses. The picture of the black hose set is all of the OEM hoses our set replaces. 

Unlike Rubber hoses, our hoses will not crack, stiffen or fail over time. Also our silicone hoses offer a wider operational temperature range than rubber hoses. Our hoses are hand built using a multi-ply method, which enables them to withstand much higher operational pressures, then extruded hoses.

Stainless Steel Worm Clamps Included
Lifetime Manufacture Warranty.

Catch Can Hose Option: Two 3’ x 3/8” ID  silicone hoses for a catch can setup. Hoses will color match your coolant hoses. Catch can hose is listed as it own product listing under Cooling.

** Please Note: Your hoses will be made custom made and will take approximately ~4 weeks to be shipped out to you. 

Color:
Do you have a 2"-3" Body Lift?:
Quantity:
Add To Cart

Hose Specifications-
Fire Retardant
Operational Temperature: -65F to 500F
Bursting Pressure: 245PSI
Wall Thickness, 3 Ply: 4.5mm

Hoses are manufactured from with Nomex® (Meta-Aramid) fabric reinforcement between all layers. Liner is made of fluorosilicone and fluorocarbon which ensures the hoses perform even under the most severe circumstances.

This set includes a longer upper rad hose that will need to be cut shorter to fit your body lift height. The lower rad hose is OEM length and may also need to be cut shorter to account for your body lift.

** Note: Your hoses will be made custom made and will take approximately 4-5 weeks to be shipped out to you.

Due to the custom order nature of this product we cannot cancel your order once it has been place.