VG33 Body Lift Upper Hose for 1st Gen Nissan Xterra & Frontier (VG33E & VG33ER 3.3L)

20180123_130006-1.jpg
OEM vs BL VG33.jpg
BL VG33 in vehicle.jpg
20180123_130006-1.jpg
OEM vs BL VG33.jpg
BL VG33 in vehicle.jpg
sold out

VG33 Body Lift Upper Hose for 1st Gen Nissan Xterra & Frontier (VG33E & VG33ER 3.3L)

35.00

Free Shipping on Everything We Sell!!

We do have some of these in stock but have decided to stop selling them due to the diameter being slightly too big (1.50” ID instead of 1.30” ID). If you would still like one please email us. sales@offroadgorilla.com

This is for the upper radiator hose only for body lifted vehicles.

This hose will fit the following vehicles with a 2"-3" body lift. 

'98 to '04 1st Gen Xterras and Frontiers with either a VG33E  or VG33ER 3.3L engine, both super charger and none super charged versions. These are the standard engines in the USA.

Also fits:

96-00 Pathfinder.

96-04 Pathfinder Australia.

97-04 Infiniti QX4.

98-04 Frontier N/A.

01-04 Frontier Supercharged.

00-04 Xterra N/A.

02-04 Xterra Supercharged.

The above listed vehicles should have the Engine Type: VQ40 - 4.0L V6  This is the standard engine in the USA.

Stainless Steel Worm Clamps Included
Hoses have a Lifetime Manufacture Warranty

This includes a PreCool longer upper rad hose that will need to be cut shorter to fit your body lift height.

High Temp 3-ply Reinforced Silicone Complete Radiator Hose Kit

Unlike Rubber hoses, PreCool hoses will not crack, stiffen or fail over time. Also PreCool silicone hoses offer a wider operational temperature range than rubber hoses. PreCool hoses are hand built using a multi-ply method, which enables them to withstand much higher operational pressures, then extruded hoses.

** Please Note: Your hose will be made custom made and will take approximately ~6 weeks to be shipped out to you. 

 

We also carry coolant hoses for: Nissan Titan VK56, Nissan Titan XD Cummins and Nissan 3.3L engines.

Color:
Add To Cart

Hose Specifications-
Fire Retardant
Operational Temperature: -65F to 500F
Bursting Pressure: 245PSI
Wall Thickness, 3 Ply: 4.5mm

Hoses are manufactured from with Nomex® (Meta-Aramid) fabric reinforcement between all layers. Liner is made of fluorosilicone and fluorocarbon which ensures the hoses perform even under the most severe circumstances.

The upper radiator body lift hose has a slightly over sized inner diameter but will seal properly with the provided band clamps.

** Note: Your hoses will be made custom made and will take approximately 6 weeks to be shipped out to you.