PRE-Cool Silicone Coolant Hose Kit, 1st Gen Nissan Xterra & Frontier (VG33E & VG33ER 3.3L) no Body Lift

22662594_549897218682452_1241400750_o.jpg
20171020_070355-1.jpg
20171020_071744-1.jpg
20171020_082312-1.jpg
22662503_549897215349119_357791941_o.jpg
22664413_549897228682451_943279470_o.jpg
22690511_549897188682455_1713166730_o.jpg
Dark Orange.jpg
Picture1.png
22662594_549897218682452_1241400750_o.jpg
20171020_070355-1.jpg
20171020_071744-1.jpg
20171020_082312-1.jpg
22662503_549897215349119_357791941_o.jpg
22664413_549897228682451_943279470_o.jpg
22690511_549897188682455_1713166730_o.jpg
Dark Orange.jpg
Picture1.png

PRE-Cool Silicone Coolant Hose Kit, 1st Gen Nissan Xterra & Frontier (VG33E & VG33ER 3.3L) no Body Lift

200.00

Free Shipping on Everything We Sell!!

This set fits:

The following vehicles without a body lift. If you have a 2" or 3" body lift please order our other VG33 kit for body lifted vehicles.

'98 to '04 1st Gen Xterras and Frontiers with either a VG33E  or VG33ER 3.3L engine, both super charger and none super charged versions. These are the standard engines in the USA.

Also fits:

96-00 Pathfinder.

96-04 Pathfinder Australia.

97-04 Infiniti QX4.

98-04 Frontier N/A.

01-04 Frontier Supercharged.

00-04 Xterra N/A.

02-04 Xterra Supercharged.

We also carry coolant hoses for: Nissan Titan VK56, Nissan Titan XD Cummins and Nissan Xterra, Frontier, Pathfinder 4.0L engines.

High Temp 3-ply Reinforced Silicone Complete Radiator Hose Kit

Our kit is a direct replacement for your rubber OEM hoses. The picture of the black hose set is all of the OEM hoses our set replaces. 

Unlike Rubber hoses, our hoses will not crack, stiffen or fail over time. Also our silicone hoses offer a wider operational temperature range than rubber hoses. Our hoses are hand built using a multi-ply method, which enables them to withstand much higher operational pressures, then extruded hoses.

Stainless Steel Worm Clamps Included
Lifetime Manufacture Warranty

Available in 11 Colors (Blue, Black, Red, Green, Yellow, Orange, Dark Orange, Purple, Pink, White and Glow in the Dark Turquoise)

Catch Can Hose Option: Two 3’ x 3/8” ID  silicone hoses for a catch can setup. Hoses will color match your coolant hoses.

** Note: Your hoses will be made custom made and will take approximately ~4 weeks to be shipped out to you.

Color:
2" or 3" Body Lift:
Quantity:
Add To Cart

Hose Specifications-
Fire Retardant
Operational Temperature: -65F to 500F
Bursting Pressure: 245PSI
Wall Thickness, 3 Ply: 4.5mm

Hoses are manufactured from with Nomex® (Meta-Aramid) fabric reinforcement between all layers. Liner is made of fluorosilicone and fluorocarbon which ensures the hoses perform even under the most severe circumstances.

** Note: Your hoses will be made custom made and will take approximately 3-4 weeks to be shipped out to you.